Rode VideoMic Pro+ On-Camera Shotgun Microphone

Description

The Rode VideoMic Pro Plus is a supercardioid condenser shotgun microphone with an integrated Rycote Lyre shockmount, a built-in rechargeable battery, an improved response over its predecessor (20 Hz to 20 kHz), and improved RF-immunity as well. The microphone can be used to capture audio for camcorders, DSLR, and portable recorders as a source of primary and reference audio.

The VideoMic Pro Plus sports a 3.5mm stereo mini-jack termination, outputs a dual-mono signal, and provides a TRS cable to make the connection. A micro-USB cable is also supplied, which can be used to draw bus-power. The microphone’s supercardioid polar pattern ensures that surrounding audio is minimized, and that your recording is focused on the subject in front of the camera. Its inherent low-noise circuitry ensures you will not pick up any sound from the microphone’s robust innards. The microphone boasts +20 dB settings for DSLR cameras, a flat setting for high-quality preamps, and a -10 dB pad.

Other features abound, such as an Automatic Power Function, a built-in battery door, and a high-pass filter with cuts at 75 Hz and 150 Hz. The filter will prevent low-end noise such as air conditioners and traffic from being picked up on the resulting track. If you’re unsure how loud the audio you’re capturing might be, you can set the right channel to record at a lower level for safety. A selectable high-frequency boost is also available.

To power the VideoMic Pro Plus, you can use two AA batteries, the micro-USB cable, or the built-in rechargeable LB-1 lithium-ion battery, which lasts 100 hours on a single charge. This microphone features an auto-powering feature which helps you save battery life by powering on with a mic cable is connected and powering off when it isn’t.

Key Features 

• Automatic power function with plug-in power
• Power via LB-1, 2 x AA batteries, or micro-USB
• Ships with LB-1 lithium-ion rechargeable battery, detachable 3.5mm TRS cable
• Built-in battery door
• LED indicator for power source and charging / discharging status
• Micro-USB port for charging removable LB-1 battery
• Digital switching
• Audio level adjustment
• Dual high-pass filter options
• High-frequency boost
• Dual mono unbalanced output
• Safety channel option on right channel
• Ambient-light detect to boost LED brightness
• Low-noise circuitry
• Improved RF immunity
• Rycote Lyre shock mounting on-board

Acoustic Principle	Line Gradient
Active Electronics	JFET impedance converter
Capsule	0.55″
Polar Pattern
Address Type	End
Frequency Range	20Hz – 20kHz (selected HPF @75Hz/150Hz)
Output Impedance	200Ω
Maximum SPL	133dBSPL
Maximum Output Level	7.7dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity	-33.6dB re 1 Volt/Pascal (21.20mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)	14dBA
Power Options	Rode LB-1 Lithium Battery, AA Battery, Micro-USB
Weight	122g
Dimensions	111mmH x 66mmW x 170mmD
Output	3.5mm TRS
Warranty	1 year with free extension to 10 years (Excluding battery) following registration here